The appearance of corrosion on a vintage vehicle is a sign of age. When you’re restoring the vehicle to its glory days, it’s essential to treat and repair the affected areas. Read this article and learn how to remove rust spots from vintage military vehicles.
How Corrosion Occurs
In natural environments, iron is always subject to rust due to its chemical makeup. Steel and iron will be reduced to nothing but iron oxide when enough time passes. In most restoration cases, rust is present and typically a high priority.
Once you understand the type of corrosion you’re battling, you can begin to look at how to remove rust spots from vintage military vehicles.
Types of Rust
There are different levels of rust and each one requires a unique treatment method. The older the vehicle and the longer it’s been unused, then the more advanced the corrosion is.
Typically spots begin at the surface level because of nicks or cracks. From there, scaling rust develops, which eats through the surface and wears on the metal’s strength. If this is left unchecked and untreated, it turns into penetrating rust. The form of rust will eat the metal, which will cause flaking, weak spots, and holes.
What You Can Do
You can stop rust by sanding the areas of exposed corrosion. If the site is small and superficial, sand off the rust and the surrounding paint to allow a more blended treatment. If there are holes present, apply a patch panel.
After thoroughly sanding off the rusty spots and exposing the shiny metal, clean the area with grease-fighting dish soap. Apply a rust inhibitor to the newly cleaned and treated area. When you’re ready to apply fresh paint, take a look at our selection of military vehicle paint for sale.
If you’re experiencing a case of severe rust on your vintage military vehicle, get in touch with Army Jeep Parts, and we’ll help you navigate the best solutions for the project.